2018 GMC Yukon Tie Rod End
4 itemsFix loose steering and uneven tire wear with an A-Premium Tie Rod End Kit. Includes inner & outer tie rods with all necessary hardware for a hassle-free, complete install.
- All filters
- Sort By
- Price
- Placement on Vehicle
- Brand
- Warranty
Choose the Right Tie Rod End for Your Vehicle
A tie rod end connects steering movement to the wheel assembly, but the correct part depends on whether your vehicle needs an inner or outer end, the installation side, and the exact steering configuration. Start by entering the year, make, model, trim, and engine. Then compare the product title, placement, thread or build notes, and package quantity with the part being replaced. Use the VIN or service information when the catalog shows multiple choices.
Inner vs. Outer Tie Rod Ends
An inner tie rod connects to the steering gear or rack, while an outer tie rod end connects the steering linkage to the steering knuckle. Some vehicles use different parts on the driver and passenger sides, and some listings combine inner and outer pieces in one tie rod end kit. Do not assume every kit covers both sides or the complete linkage. Review placement, quantity, thread information, and each included component on the product page. If damage extends to the gear itself, compare the related power steering rack category before deciding what the repair requires.
Symptoms That Call for a Steering Inspection
Steering looseness, uneven tire wear, a clunk over bumps, or a vehicle that wanders can occur when a tie rod joint has play, but these symptoms do not identify one failed part by themselves. Worn ball joints, control arm bushings, wheel bearings, steering gear components, alignment settings, or tires can produce similar behavior. Inspect the steering and front suspension as a system. Visible joint movement, a damaged boot, or looseness found during a hands-on inspection gives a better basis for selecting a replacement.
Tie Rod End Fitment and Kit Checks
Match more than the vehicle name. Confirm inner or outer location, front placement, left or right designation, thread direction and size, stud shape, overall dimensions, and any drivetrain or production-date note. A listing may contain one end, a side pair, or a multi-piece steering set. Check whether boots, jam nuts, cotter pins, or grease fittings are shown as included rather than assuming the hardware transfers from the old assembly. The vehicle selector and product-specific notes should agree before purchase.
Replacement and Alignment Considerations
Record the old tie rod position before removal, but treat that measurement only as a starting point. Use the vehicle service procedure for safe lifting, fastener handling, joint separation, and final tightening. Protect the new boot from tools and confirm that nearby hoses and wiring remain clear through the steering range. Because tie rod replacement can change toe, arrange an alignment check after installation. Stop driving and seek a qualified inspection if the steering has pronounced free play or the joint is separating.
Frequently Asked Questions (FAQ)
How do I know whether I need an inner or outer tie rod end?
The location of confirmed play determines the part: the inner joint connects to the steering gear, while the outer joint connects at the knuckle. Inspect both joints and compare the original assembly with the product placement before ordering.
Does a tie rod end kit include parts for both sides?
Not always. A kit may contain one end, a left-and-right pair, or inner and outer pieces for both sides. Read the quantity, placement, and package-content fields on the specific listing instead of relying on the word kit alone.
Can a loose steering wheel confirm a bad tie rod end?
No. Steering looseness can come from tie rods, ball joints, wheel bearings, the steering gear, or other connections. A hands-on inspection should locate the movement before a steering tie rod end is selected for replacement.
Do tie rod ends need to be replaced in pairs?
Pair replacement is not required in every case. Inspect the matching side for boot damage, corrosion, and joint play, then base the decision on its condition, vehicle service guidance, and whether a paired kit suits the repair.
Is an alignment needed after tie rod end replacement?
A tie rod end affects the steering linkage length and can change toe, so an alignment check should follow replacement. Marking or counting the old position can aid assembly, but it does not replace measuring the final wheel alignment.
