Convertible Top Lift Motor Pump

Common symptoms of a bad convertible top lift motor pump

If the convertible top is sluggish to raise or lower, or the movement appears erratic and uneven, this may point to an issue with the motor pump. Diminished hydraulic pressure or flow due to a malfunctioning motor, worn pump components, or fluid leaks can lead to lethargic and inconsistent top operation. Peculiar noises emanating from the motor pump area, such as grinding or whining sounds, could also signal mechanical problems like deteriorated bearings or internal damage.

In more severe cases, the top may refuse to budge at all, which likely indicates a complete failure of the motor pump. This can stem from electrical faults or a total breakdown of the pump's internal mechanisms. Visible fluid leaks around the pump or dashboard warning lights are additional indicators that the lift motor pump requires attention. Identifying these problems early can help prevent further damage and ensure reliable, hassle-free convertible top functionality.

How to replace your convertible top lift motor pump

• Prepare the vehicle: Park the car on level ground, apply the parking brake, and disconnect the negative battery cable. Lower the convertible top to access the motor pump assembly.
• Detach the old motor pump: Locate the convertible top lift motor pump, often found under the rear deck or in the trunk. Disconnect the electrical connector(s) and any hydraulic lines attached to the pump. Remove the mounting hardware to free the old motor pump.
• Install the new motor pump: Position the new motor pump in the correct orientation and secure it with the appropriate mounting hardware. Reconnect the hydraulic lines and electrical connectors to the new pump.
• Bleed the hydraulic system: Following the relevant instructions, bleed any air from the hydraulic system by operating the convertible top.
• Test and reassemble: Reconnect the negative battery cable and test the new motor pump by fully raising and lowering the convertible top. Reinstall any removed trim or components to return the vehicle to its original state.

Elevate your ride with the power of A-Premium

Engineered with longevity in mind, A-Premium's convertible soft-top latch assembly actuator is built to withstand the rigors of regular use. Boasting a robust construction, this actuator ensures your convertible top operates dependably, time and time again. Precise control is at the heart of this component's design. The actuator delivers the necessary muscle to effortlessly raise and lower your convertible top, all while maintaining a whisper-quiet, vibration-free performance. We not only provide a 90-day free return policy and a 3-year warranty, but our customer service team is also available 24 hours a day, 7 days a week to serve you.

Whether you're chasing the sun with the top down or shielding your interior from the elements, you can count on the trustworthy performance of the A-Premium convertible soft top latch assembly actuator.